Pentium

Major changes from the 486:

• Superscalar architecture - The Pentium has two datapaths that allow it to complete more than one instruction per clock cycle. One pipe (called "U") can handle any instruction, while the other (called "V") can handle the simplest, most common instructions.
• 64-bit data path - This doubles the amount of information pulled from the memory on each fetch.
• MMX instructions (later models only) - A special 64-bit instruction set designed for use in multimedia applications.

Pentium architecture chips offered just under twice the performance of a 486 processor per clock cycle. The fastest Intel 486 parts were almost the same speed as a first-generation Pentium, and a few late-model AMD 486 parts were roughly equal to the Pentium-75.

The earliest Pentiums had a clock speed of 66 MHz, with a 60 MHz version also being produced. Later on 75, 90, 120, 133, 150, 166, 200, and 233 MHz versions gradually became available. Pentium OverDrive processors were released at speeds of 63 and 83MHz as an upgrade option for older 486-class computers.

The original Pentium microprocessor had the internal code name P5, and was a pipelined in-order superscalar microprocessor. This was followed by the P54C, a compaction which was dual-processor ready. Subsequently, the P55C was released as the Pentium with MMX Technology (usually just called Pentium MMX); it was based on the P5 core, but had significant changes for MMX and improved instruction decoding.

In early 5 volt 60 MHz and 66 MHz Pentiums, a problem in the floating point unit code when doing division was discovered in 1994 and is known as the Pentium FDIV bug. These early examples of Pentium processors were also known for their fragility and relatively high levels of heat-production.

Intel has retained the Pentium brand name for later generations of processor architectures, which are internally quite different from the Pentium itself:

• Pentium Pro
• Pentium II
• Pentium III
• Pentium 4
• Pentium M

It can be seen from this that brand name is only loosely related to the nature of a CPU's microarchitecture. The Pentium brand is now used for desktop parts, the Celeron brand is used for "value" parts (typically lower performance and lower price), and the Xeon brand is used for high-performance parts suitable for servers and power-users. The same basic microarchitecture may be used for all brands, but implementations may differ in clock speeds, cache sizes, and package and sockets. Moreover, the same name is used for chips with unrelated microarchitectures.

See also List of Intel microprocessors

Referenced By