community
directory
books
authors
images
encyclopedia
Email:
Password:
Register

Knowledgerush Search

 
Google
  Web knowledgerush


Search for images of MIL-STD-188


Message boards   Post comment

MIL-STD-188

MIL-STD-188 is a series of U.S. military standards relating to telecommunications.

Documents

  • 100 - Common Long Haul and Tactical Communication System Technical Standards.
  • 105 - Interoperability and Performance Standards for the All Digital Tactical-To-Strategic Gateway.
  • 110 - Interoperability Information Link (TADIL, Link 11).
    • 110A - Advanced Narrowband Digital Voice Terminal (ANDVT)
  • 331 - Interoperability and Performance Standard for Video Teleconferencing.
  • 340 - Equipment Technical Design Standards for Voice Orderwire Muliplex.
  • 341 - Non-Diversity Digital Data 2400 bits per second.
  • 342 - Standards for Long Haul Communications Equipment Technical Design Standards for Voice Frequency Carrier Telegraph (FSK).
  • 344 - Non-Diversity Digital Data 1200 bits per second.
  • 346 - Standards for Long Haul Communications-Equipment Technical Design Standards for Analog End Instruments and Central Office Ancillary Devices.
  • 347 - Equipment Technical Design Standards for Digital End Instruments and Ancillary Device.

Referenced By

ASN.1 | Abstract Syntax Notation 1 | Abstract syntax notation one | Access control | Access time | Acoustic coupler | Acquisition | Address | Adjacent-channel interference | Alarm sensor | Alphanumeric | Alternate party | Ambient noise level | Analog | Analog circuit | Analog decoding | Analog signal | Analog signal processing | Analogue | Analogue signal | Antenna height above average terrain | Antenna noise temperature | Aperture-to-medium coupling loss | Arithmetic overflow | Asynchronous communications system | Asynchronous operation | Atmospheric duct | Attribute | Audible ringing tone | Automatic Data Processing | Automatic call distributor | Auxiliary power | Availability | Available line | Back-to-back connection | Backbone | Backscattering | Backup generator | Backward channel | Balance return loss | Balanced line | Balancing network | Band-stop filter | Bandwidth compression | Beam diameter | Beamwidth | Bias | Bilateral synchronization | Binary notation | Bipolar signal | Bit-count integrity | Bit error ratio | Bit inversion | Bit pairing | Bit per second | Bit stuffing | Bits per second | Black facsimile transmission | Black recording | Block | Bonding | Bridging loss | Buffer | Burst transmission | Busy signal (telephony) | Bypass | COMSEC | Call | Call-second | Call collision | Call set-up time | Capacitive coupling | Capture effect | Carrier | Carrier-to-receiver noise density | Carrier shift | Carrier system | Cesium standard | Chadless tape | Channel noise level | Character-count integrity | Chemical buffer | Circuit noise level | Circuit reliability | Circuit switched | Circuit switching | Circular polarization | Circulator | Cladding | Clearing | Clipping | Code conversion | Code word | Coherence length | Coherence time | Collision | Combined distribution frame | Command | Common-mode interference | Common battery ...

 

Compose Your Message

Your Email Address or Pen Name (optional):
Subject:
Your Message:
 

 

 

 

 

 

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "MIL-STD-188".

 

Contact Us | Privacy Statement & Terms of Use

 
Copyright © 1999-2003 Knowledgerush.com. All rights reserved.